LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (8HP75 Automatic Transmission (Service Information) (2 Of 2)) >> Disassembly And Assembly >> Transmission And Internal Clutches >> 8HP75 - Assembly >> (Torque Specifications - Internal Transmission)

(Torque Specifications - Internal Transmission)

WARNING: This page is about a different variant/trim than selected.
DESCRIPTION SPECIFICATION COMMENT
Hydraulic Impulse Solenoid (HIS) Bolts 27 N. m (20 Ft. Lbs.)  -
Output Speed Sensor Bolt 8 N. m (71 In. Lbs.)  -
Park Pawl Lock Rod Guide Plate Bolt 10 N. m (89 In. Lbs.)  -
Pawl Shaft Plug 35 N. m (26 Ft. Lbs.)  -
Shifter Control Support Nuts 10 N. m (89 In. Lbs.)  -
Transmission Oil Pan Bolts 10 N. m (89 In. Lbs.)  Tightening Sequence
GC0209113Courtesy of CHRYSLER GROUP, LLC
Transmission Oil Pan Drain Plug 9 N. m (80 In. Lbs.)  -
Transmission Oil Pump Assembly To Case Bolts Torque Procedure: 
  1. In order to seat the oil pump cover properly, pre tighten bolts one, seven and nine to 6 N.m (53 in. lb.)  .
  2. Working in a clockwise pattern, beginning with number one, tighten to 10 N.m (89 in. lb.)  .
  3. Working in a clockwise pattern, beginning with number one, tighten an 90°  .
 If removed, NEW  fasteners must be installed
GC0209110Courtesy of CHRYSLER GROUP, LLC
Transmission Oil Pump Housing To Cover Bolts 5 N. m (44 In. Lbs.) + 45°  If removed, NEW  fasteners must be installed
Tightening Sequence
Valve Body Bolts 8 N. m (71 In. Lbs.)  Tightening Sequence
GC0181792Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals