Manual Park Release (MPR) Cable: Removal
WARNING: This page is about a different variant/trim than selected.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE
.
1 - Manual Park Release Cable Bracket Bolts 2 - Manual Park Release Cable End - Disconnect the Manual Park Release (MPR) cable end from the MPR lever.
- Remove the MPR cable bracket bolts and the MPR cable from the transmission.
1 - MPR Cable Stays - Remove the cable stays holding the cable to the transmission.
- Remove the support and lower the vehicle.
1 - MPR Cable (Transmission side) 2 - MPR Cable (Lever side) - Disconnect the MPR cable from the MPR lever cable and remove from the vehicle.