Possible Causes
WARNING: This page is about a different variant/trim than selected.
| Possible Causes |
|---|
| CAMSHAFT 1/2 POSITION SOLENOID CONTROL CIRCUIT SHORTED TO GROUND |
| CAMSHAFT 1/2 POSITION SOLENOID CONTROL CIRCUIT SHORTED TO VOLTAGE |
| CAMSHAFT 1/2 POSITION SOLENOID CONTROL CIRCUIT OPEN/HIGH RESISTANCE |
| GROUND CIRCUIT OPEN/HIGH RESISTANCE |
| CAMSHAFT 1/2 POSITION SOLENOID |
| POWERTRAIN CONTROL MODULE (PCM) |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .