LEMON Manuals
: Even more car manuals for everyone
Home
>>
Jeep
>>
2023
>>
Grand Cherokee Altitude, AWD
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 32 (Hybrid Control Processor Module (HCP) - DTCS P1C8E-00 To P2535-00)
>>
DTC Troubleshooting
>>
P2534-00 Ignition Switch On/Start Position Circuit Low
>>
Set Condition
Set Condition
WARNING:
This page is about a different variant/trim than selected.
The hard-wired ignition circuit signal does not match the ignition signal as received from the PCM via CAN.