(Torque Specifications - MPT3028C Transfer Case)
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS - MPT3028C TRANSFER CASE
| DESCRIPTION | SPECIFICATION | COMMENT |
|---|---|---|
| Bending Damper Bolts | 25 N.m (18 Ft. Lbs.) | - |
| Case Bolts | 22 N.m (16 Ft. Lbs.) | - |
| Drain/Fill Plug | 27 N.m (20 Ft. Lbs.) | - |
| Output Flange Nut | 165 N.m (122 Ft. Lbs.) | - |
| Shift Motor Mounting Bolts | 25 N.m (18 Ft. Lbs.) | - |
| Shift Motor M8 Cover Bolt | 11 N.m (97 In. Lbs.) | - |
| Shift Motor M10 Cover Bolts | 25 N.m (18 Ft. Lbs.) | - |
| Torsional Damper Bolts | 25 N.m (18 Ft. Lbs.) | - |
| Transfer Case Position Sensor Bolts | 6 N.m (53 In. Lbs.) | - |
| Transfer Case to Transmission Bolts | 48 N.m (35 Ft. Lbs.) | - |