Enabling Conditions And Possible Causes - Ambient Air Temperature DTCS
WARNING: This page is about a different variant/trim than selected.
| MONITORING CONDITIONS |
| P0071-00 AMBIENT AIR TEMPERATURE SENSOR PERFORMANCE |
Continuous with the ignition on, battery voltage above a calibrated threshold and diagnostic monitor enabled, no communication failures with the BCM, and vehicle speed is present. |
| P0072-00 AMBIENT AIR TEMPERATURE SENSOR CIRCUIT LOW |
| P0073-00 AMBIENT AIR TEMPERATURE SENSOR CIRCUIT HIGH |
| FAULT SETTING CRITERIA |
| P0071-00 AMBIENT AIR TEMPERATURE SENSOR PERFORMANCE |
The BCM has sent a message to the Hybrid Control Processor (HCP) indicating the Ambient Air Temperature (AAT) Sensor is faulted. |
| P0072-00 AMBIENT AIR TEMPERATURE SENSOR CIRCUIT LOW |
The BCM has sent a message to the Hybrid Control Processor (HCP) indicating the Ambient Air Temperature (AAT) Sensor is faulted. |
| P0073-00 AMBIENT AIR TEMPERATURE SENSOR CIRCUIT HIGH |
The BCM has sent a message to the Hybrid Control Processor (HCP) indicating the Ambient Air Temperature (AAT) Sensor is faulted. |
| DEFAULT AND LIMP-IN ACTIONS |
| P0071-00 AMBIENT AIR TEMPERATURE SENSOR PERFORMANCE |
Malfunction Indicator Lamp (MIL) on. |
| P0072-00 AMBIENT AIR TEMPERATURE SENSOR CIRCUIT LOW |
Malfunction Indicator Lamp (MIL) on. |
| P0073-00 AMBIENT AIR TEMPERATURE SENSOR CIRCUIT HIGH |
Malfunction Indicator Lamp (MIL) on. |
| POSSIBLE CAUSES |
| P0071-00 AMBIENT AIR TEMPERATURE SENSOR PERFORMANCE |
- Ambient Temp DTCs set in the BCM
- CAN FD Bus DTCs
- CAN FD Bus Off Performance DTCs.
|
| P0072-00 AMBIENT AIR TEMPERATURE SENSOR CIRCUIT LOW |
- Ambient Temp DTCs set in the BCM
- CAN FD Bus DTCs
- CAN FD Bus Off Performance DTCs.
|
| P0073-00 AMBIENT AIR TEMPERATURE SENSOR CIRCUIT HIGH |
- Ambient Temp DTCs set in the BCM
- CAN FD Bus DTCs
- CAN FD Bus Off Performance DTCs.
|