PCV Valve: Removal

The Positive Crankcase Ventilation (PCV) valve is mounted in the right rear side of the intake manifold.

1. Remove the engine cover.

   Courtesy of CHRYSLER GROUP, LLC

   1 - PCV Valve

2. Disconnect the PCV hose from the PCV valve.

   Courtesy of CHRYSLER GROUP, LLC

   1 - PCV Valve

   2 - PCV Valve O-rings

   3 - Locating Tabs

3. Rotate PCV valve counterclockwise 90 degrees then pull up and remove the PCV valve from intake manifold.
4. Check the condition of the two PCV valve O-rings, replace if necessary.