LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (5.7L - Exhaust System) >> Shield, Heat >> Removal And Installation >> Spare Tire Heat Shield >> Removal

Spare Tire Heat Shield: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the spare tire.
    GC0201074Courtesy of CHRYSLER GROUP, LLC
    1 - Spare Tire Heat Shield
    2 - Spare Tire Heat Shield Bolts
    3 - Push Pin Fasteners
    4 - Spare Tire Heat Shield Nuts
  3. Remove the spare tire heat shield bolts securing the spare tire heat shield.
  4. Remove the push pin fasteners.
  5. Remove the spare tire heat shield nuts and the spare tire heat shield.
scientia non olet · About LEMON Manuals