Connecting Rod
WARNING: This page is about a different variant/trim than selected.
CONNECTING ROD
| DESCRIPTION | SPECIFICATION | |
|---|---|---|
| Metric | Standard | |
| Bearing Clearance | 0.040 - 0.078 mm | 0.0016 - 0.0031 in. |
| Bore Diameter-Piston Pin | 22.403 - 22.409 mm | 0.8820 - 0.8822 in. |
| Bore Diameter-Crankshaft End | 53.000 - 53.015 mm | 2.0866 - 2.0872 in. |
| Side Clearance* | 1.9 - 2.1 mm | 0.075 - 0.083 in. |
| Weight (Big End / Small End) | 392.5 / 166.7 grams | 13.84 / 5.88 oz. |
* Total side clearance, there should be nominally 1mm on each side of this piston-guided connecting rod, if the rod is centered.