Special Tools: Notes

Courtesy of CHRYSLER GROUP, LLC	10368 - Set, Universal Protective Cap
Courtesy of CHRYSLER GROUP, LLC	C-3422-D - Compressor, Valve Spring
Courtesy of CHRYSLER GROUP, LLC	MD998772A - Compressor, Valve Spring (Originally Shipped In Kit Number(s) 8678, 8853, 8854.)
Courtesy of CHRYSLER GROUP, LLC	10224 - Adapter, Valve Spring (Originally Shipped In Kit Number(s) 10223.)
Courtesy of CHRYSLER GROUP, LLC	8189 - Guide Pins (Originally Shipped In Kit Number(s) 8180, 8180CC, 8263, 8263CC.)
Courtesy of CHRYSLER GROUP, LLC	W-262 - Installer, Bearing (Originally Shipped In Kit Number(s) 8418.)
Courtesy of CHRYSLER GROUP, LLC	8805 - Installer, Bearing (Originally Shipped In Kit Number(s) 8703, 8703CC, 9988, 9989.)
Courtesy of CHRYSLER GROUP, LLC	8534C - Fixture, Driveline Support (Originally Shipped In Kit Number(s) 8534, 8534B, 8849, 9565.)
Courtesy of CHRYSLER GROUP, LLC	2049200090 - Regulator, Pressure Test
Courtesy of CHRYSLER GROUP, LLC	C-3292A - Gauge, Pressure
Courtesy of CHRYSLER GROUP, LLC	10282 - Adapter, Engine Oil Pressure
Courtesy of CHRYSLER GROUP, LLC	2035300090 - Holder, Chain Tensioner
Courtesy of CHRYSLER GROUP, LLC	2050800090 - Wrench, Camshaft Holding
Courtesy of CHRYSLER GROUP, LLC	9506 - Installer, Oil Seal (Originally Shipped In Kit Number(s) 9610, 9970.)
Courtesy of CHRYSLER GROUP, LLC	2044600090 - Remover, Crankshaft Seal
Courtesy of CHRYSLER GROUP, LLC	2044800090 - Guide, Crankshaft Seal
Courtesy of CHRYSLER GROUP, LLC	C-4171-3 - Seal Driver Handle, Short
Courtesy of CHRYSLER GROUP, LLC	2024600090 - Installer, Crankshaft Seal
Courtesy of CHRYSLER GROUP, LLC	2054400090 - Holder, Front Damper 4 Finger SHALLOW
Courtesy of CHRYSLER GROUP, LLC	2024800090 - Holder, Front Damper 4 Finger DEEP
Courtesy of CHRYSLER GROUP, LLC	2076900140 - Tool, 2.0L GME Fuel Line Disconnect
Courtesy of CHRYSLER GROUP, LLC	10272 - Tool, Flywheel Locking
Courtesy of CHRYSLER GROUP, LLC	6958 - Wrench, Spanner (Originally Shipped In Kit Number(s) 6947, 6949, 6966, 8204, 8204CC, 8667.)
Courtesy of CHRYSLER GROUP, LLC	2081700090 - Stretch Belt Installation Tool
Courtesy of CHRYSLER GROUP, LLC	2027100090 - Kit, Engine Timing
Courtesy of CHRYSLER GROUP, LLC	C-3339A - Set, Dial Indicator (Originally Shipped In Kit Number(s) 9202.)

Included in Kit, Engine Timing 2027100090:

• (special tool #2027101090, Alignment Pins, Balance Shaft)
• (special tool #2027102090, Alignment Pins, Oil Pump)
• (special tool #2027103090, Wrench, Oil Pump)
• (special tool #2027104090, Holder, Oil Pump Gear Teeth)
• (special tool #2027105090, Alignment Tool, Oil Pump Shaft)
• (special tool #2027106090, Tool, Left Balance Shaft Guide)
• (special tool #2027108090, Remover, Gear Tooth Holder)
• (special tool #2027107090, Case, Engine Timing)