Cylinder Block
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK
| DESCRIPTION |
SPECIFICATION |
| |
Metric |
Standard |
| Cylinder Bore Diameter |
99.50 mm |
3.92 in. |
| Out of Round (MAX) |
0.0076 mm |
0.0003 in. |
| Taper (MAX) |
0.0127 mm |
0.0005 in. |
| Flatness (Maximum Allowed Tolerance) |
0.010 |
0.0004 in. |
| Lifter Bore Diameter |
21.45 - 21.425 mm |
0.8444 - 0.8435 in. |