Engine Specifications: Camshaft

WARNING: This page is about a different variant/trim than selected.

CAMSHAFT

DESCRIPTION	SPECIFICATION
	Metric	Standard
Bearing Journal Diameter
No. 1	61.655 - 61.680 mm	2.4273 - 2.4283 in.
No. 2	57.78 - 57.80 mm	2.2748 - 2.2755 in.
No. 3	57.38 - 57.40 mm	2.2590 - 2.2598 in.
No. 4	56.98 - 57.00 mm	2.2433 - 2.2440 in.
No. 5	43.613 - 43.633 mm	1.7170 - 1.7178 in.
Bearing To Journal Clearance Standard
No. 1	0.03 - 0.07 mm	0.0011 - 0.0027 in.
No. 2	0.050 -0.090 mm	0.0019 - 0.0035 in.
No. 3	0.040 - 0.080 mm	.0015 - 0.0031 in.
No. 4	0.050 - 0.090 mm	0.0019 - 0.0035 in.
No. 5	0.040 - 0.080 mm	0.0015 - 0.0031 in.
Camshaft End Play	.0080 - 0.290 mm	0.0031 - 0.0114 in.
Duration	290°
Valve Lift (@ zero lash)
Intake	13.75 mm	0.5413 in.
Exhaust	12.70 mm	0.5000 in.