(Torque Specifications - Exhaust System)
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS - EXHAUST SYSTEM
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Exhaust Pipe to Catalytic Converter | 30 N.m (22 Ft. Lbs.) | - |
| 2 | Exhaust Resonator/Muffler Clamp | 30 N.m (22 Ft. Lbs.) | - |
| 3 | Exhaust Isolator Bolt(s) | 25 N.m (18 Ft. Lbs.) | - |
TORQUE SPECIFICATIONS - EXHAUST SYSTEM
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Resonator Isolator Bolt(s) | 25 N.m (18 Ft. Lbs.) | - |
| 2 | Muffler Isolator Bolt(s) | 25 N.m (18 Ft. Lbs.) | - |
| 3 | Isolator to Body Bracket Bolt(s) | 25 N.m (18 Ft. Lbs.) | - |
TORQUE SPECIFICATIONS - EXHAUST SYSTEM
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Heat Shield Nuts (Plastic) | 5 N.m (44 In. Lbs.) | - |
| 2 | Heat Shield Bolt | 5 N.m (44 In. Lbs.) | - |
TORQUE SPECIFICATIONS - EXHAUST SYSTEM
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Heat Shield Nuts (Steel) | 5 N.m (44 In. Lbs.) | - |
| 2 | Heat Shield Nuts (Plastic) | 5 N.m (44 In. Lbs.) | - |
| 3 | Center Heat Shield to Center Support Bearing Bolts | 55 N.m (41 Ft. Lbs.) | - |
| - | Catalytic Converter Heat Shield Nut (Steel) | 4 N.m (35 In. Lbs.) | - |
| - | Catalytic Converter to Turbocharger Exhaust Clamp Bolts | 20 N.m (15 Ft. Lbs.) | - |
| - | Catalytic Converter Support Bracket Bolts | 25 N.m (18 Ft. Lbs.) | - |
| - | Gas Particulate Filter Module Bracket to Shock Tower | 35 N.m (26 Ft. Lbs.) | - |
| - | Catalytic Converter Support Bracket Nuts | 30 N.m (22 Ft. Lbs.) | - |