LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Compass Latitude >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Pod, Switch >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0202732Courtesy of CHRYSLER GROUP, LLC
  1. Install the Sport Mode/Hill switch (4) into the shifter bezel (1). Install the fasteners (5) and tighten securely.
  2. Install the Hill Decent/4WD Lock switch bank (3) into the shifter bezel (1). Install the fasteners (2) and tighten securely.
  3. Install the shifter bezel. Refer to BEZEL, SHIFTER, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals