LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Trailhawk >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (2.4L Engine (Service Information) (2 Of 2)) >> Engine Block >> FLEXPLATE >> Installation

Engine Block: FLEXPLATE: Installation

WARNING: This page is about a different variant/trim than selected.
GC0170013Courtesy of CHRYSLER GROUP, LLC
  1. Install the flexplate (1).
  2. Install the washer (2).
  3. Install NEW  flexplate bolts (3) and tighten in a criss-cross pattern to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
    CAUTION:

    Do not use an impact socket or a thick walled socket when removing or installing the flexplate retaining bolts, damage to the crankshaft, internal engine or the transmission may occur.

  4. Install the transmission. Refer to 948TE AUTOMATIC TRANSMISSION, INSTALLATION .
scientia non olet · About LEMON Manuals