LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 2.0L Engine (Service Information) (2 Of 2) >> Lubrication >> Diagnosis And Testing >> Checking Engine Oil Pressure

Checking Engine Oil Pressure

GC0181030Courtesy of CHRYSLER GROUP, LLC
  1. Remove the engine oil pressure and temperature sensor (2). Refer to SENSOR, OIL PRESSURE, REMOVAL .
    GC0181592Courtesy of CHRYSLER GROUP, LLC
  2. Install the (special tool #10282, Adapter, Engine Oil Pressure) (1) and the oil pressure gauge (special tool #C-3292A, Gauge, Pressure) (2).
  3. Start the engine and record the reading on the oil pressure gauge (2).
    NOTE:

    If the oil pressure is 0 at idle, shut off the engine.

  4. After the check is complete, remove the oil pressure gauge and the adapter.
  5. Install the engine oil pressure and temperature sensor. Refer to SENSOR, OIL PRESSURE, INSTALLATION .
scientia non olet · About LEMON Manuals