LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 2.0L Engine (Service Information) (2 Of 2) >> Engine Block >> Crankshaft >> Standard Procedure >> Crankshaft End Play

Crankshaft End Play

GC0182005Courtesy of CHRYSLER GROUP, LLC
  1. Mount a dial indicator (1) to a stationary point at the front of the engine. Locate the probe perpendicular against the nose of the crankshaft.
  2. Move the crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move the crankshaft forward to the limit of travel and read the dial indicator. Compare the measured end play to the specification. Refer to ENGINE SPECIFICATIONS .
NOTE:

Crankshaft thrust bearings are not selectable and are only available in a single thickness.

scientia non olet · About LEMON Manuals