Panel, Silencer, Lower: Removal

Courtesy of CHRYSLER GROUP, LLC

Passenger Side 

1. Remove push-pin fasteners (2).
2. If equipped with floor lamp, disconnect the wire harness connector.
3. Remove silencer panel (1) from the vehicle.

Driver Side 

1. Remove the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL .
2. Remove the driver side front door sill plate. Refer to PLATE, SCUFF, LIFTGATE, REMOVAL .

   Courtesy of CHRYSLER GROUP, LLC

3. Disengage and remove the hood release handle (1) from silencer panel (4).
4. Disengage and remove data link connector (2) from silencer panel (4).
5. Remove the fasteners (3).
6. If equipped with floor lamp, disconnect the wire harness connector.
7. Remove silencer panel (4) from the vehicle.