LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (2.0L Exhaust System) >> Shield, Heat >> Removal >> Center Heat Shield

Center Heat Shield

WARNING: This page is about a different variant/trim than selected.
  1. Remove the propeller shaft. Refer to DRIVESHAFT, REMOVAL .
  2. Remove the right side skid plate to expose center heat shield fasteners. Refer to PLATE, SKID, SIDE, REMOVAL .
  3. Remove the left side skid plate to expose center heat shield fasteners. Refer to PLATE, SKID, SIDE, REMOVAL .
    GC0187181Courtesy of CHRYSLER GROUP, LLC
  4. Remove the fasteners (1) and the center heat shield (2).
scientia non olet · About LEMON Manuals