LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (2.0L Engine (Service Information) (2 Of 2)) >> Valve Timing >> Chain And Sprockets, Timing >> Removal >> Balance Shaft Sprocket

Balance Shaft Sprocket

WARNING: This page is about a different variant/trim than selected.
  1. Remove the timing chain cover. Refer to COVER(S), ENGINE TIMING, REMOVAL .
  2. Remove the cam chain. Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL  .
  3. Remove the oil pump drive chain tensioner shoe. Refer to TENSIONER, ENGINE TIMING, REMOVAL .
  4. Remove the oil pump drive chain. Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL  .
    GC0186275Courtesy of CHRYSLER GROUP, LLC
  5. Insert the shorter of the two (special tool #2027101090, Alignment Pins, Balance Shaft) (4) through the balance shaft mount to hold the sprocket. Remove the bolt (3), washer (2) and the balance shaft sprocket (1).
scientia non olet · About LEMON Manuals