LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (2.0L Engine (Service Information) (2 Of 2)) >> Turbocharger System >> Valve, Surge >> Removal

Valve, Surge: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the top engine cover. Refer to COVER, ENGINE, REMOVAL .
    GC0186185Courtesy of CHRYSLER GROUP, LLC
  3. Loosen the band clamp (1a) and disconnect the bypass pipe (1b) from the surge valve.
    GC0186205Courtesy of CHRYSLER GROUP, LLC
  4. Unlock and disconnect the surge valve wire harness connection (1).
  5. Remove the bolts (2a) and remove the surge valve (2b) complete with seal (2c).
scientia non olet · About LEMON Manuals