LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (2.0L Engine (Service Information) (2 Of 2)) >> Lubrication >> Pump, Engine Oil >> Removal >> Engine Oil Pump

Engine Oil Pump

WARNING: This page is about a different variant/trim than selected.
multimedia:A supplement to the article is available.
  1. Remove the cylinder head cover and timing chain cover. Refer to COVER(S), ENGINE TIMING, REMOVAL .
  2. Remove the cam chain. Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL  .
  3. Remove the oil pump drive chain. Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL  .
  4. Remove the oil pump sprocket. Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL  .
    GC0181024Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the wire harness connector (1) from the engine oil pump displacement control solenoid.
    GC0180991Courtesy of CHRYSLER GROUP, LLC
  6. Remove the five bolts (1a) and remove the engine oil pump (1b).
    GC0180967Courtesy of CHRYSLER GROUP, LLC
  7. Remove the seals (1).
  8. If required, remove the stud bolt (2a) and remove the engine oil pump displacement control solenoid (2b) complete with O-ring.
scientia non olet · About LEMON Manuals