LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (2.0L Engine (Service Information) (2 Of 2)) >> Engine Mounting >> Bracket, Engine Mount, Rear >> Installation

Bracket, Engine Mount, Rear: Installation

WARNING: This page is about a different variant/trim than selected.
GC0171681Courtesy of CHRYSLER GROUP, LLC
  1. Install the rear engine mount bracket (1) and tighten the three bolts (2) to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
  2. Install the rear engine mount insulator. Refer to INSULATOR, ENGINE MOUNT, REAR, INSTALLATION .
  3. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals