LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (2.0L Engine (Service Information) (2 Of 2)) >> Engine Block >> Seal, Crankshaft Oil, Front >> Removal

Seal, Crankshaft Oil, Front: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the vibration damper from the front of the crankshaft. Refer to DAMPER, VIBRATION, REMOVAL .
    GC0180983Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Be careful not to damage the oil seal seat when removing the oil seal.

  2. Remove the oil seal (1) from the timing cover.
    NOTE:

    The oil seal is ruined during the removal operation so it must always be replaced.