Ring(S), Piston: Removal

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Typical piston shown in illustration.

Remove the piston and connecting rod(s). Refer to ROD, PISTON AND CONNECTING, REMOVAL .
CAUTION:
To avoid damage to the piston rings, they must be removed in the following order:
- No. 1 (upper) piston ring (1)
- No. 2 (intermediate) piston ring (2)
- Oil ring upper side rail (3)
- Oil ring lower side rail (4)
- Oil ring expander (5)
Courtesy of CHRYSLER GROUP, LLC
Remove the No. 1 (upper) piston ring (1) using a ring expander tool.

Courtesy of CHRYSLER GROUP, LLC
Remove the No. 2 (intermediate) piston ring (1) using a ring expander tool.

Courtesy of CHRYSLER GROUP, LLC

NOTE:
Do not use a piston ring expander to remove the oil ring side rails.
Remove the oil ring upper side rail (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the oil ring lower side rail (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the oil ring expander (1).