LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (2.0L Engine (Service Information) (2 Of 2)) >> Engine Block >> FLEXPLATE >> Removal

Engine Block: FLEXPLATE: Removal

WARNING: This page is about a different variant/trim than selected.
GC0181032Courtesy of CHRYSLER GROUP, LLC
  1. Remove the transmission. Refer to 948TE AUTOMATIC TRANSMISSION, REMOVAL .
  2. Install the (special tool #10272, Tool, Flywheel Locking) (1).
  3. Remove the bolts (2a) and remove the flexplate (2b).
    CAUTION:

    Do not use an impact socket or a thick walled socket when removing or installing the flexplate retaining bolts, damage to the crankshaft, internal engine or the transmission may occur.

  4. Using a suitable tool clean all sealant from the bolt holes.
scientia non olet · About LEMON Manuals