LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (2.0L Ignition System (Service Information)) >> Capacitor, Ignition >> Removal

Capacitor, Ignition: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the top engine cover. Refer to COVER, ENGINE, REMOVAL .
    GC0187210Courtesy of CHRYSLER GROUP, LLC
  3. Remove the ignition capacitor wire harness connector (1).
    GC0186553Courtesy of CHRYSLER GROUP, LLC
  4. Remove the nut (1) and the ignition capacitor (2).
scientia non olet · About LEMON Manuals