Seal(S), Valve Guide: Removal

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

If the valve springs are to be reused, identify their positions so that they can be reassembled into their original locations.

Remove the valve spring(s). Refer to SPRING(S), VALVE, REMOVAL .
NOTE:
Intake and Exhaust valve springs are unique. Mark accordingly prior to removal.
Remove and discard the valve guide seals (2).
NOTE:
The valve spring seat is integral to the valve guide seal. Intake and exhaust valve guide seals are unique.