LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (2.0L Engine (Service Information) (1 Of 2)) >> Cylinder Head >> Inspection

Cylinder Head: Inspection

WARNING: This page is about a different variant/trim than selected.
GC0181098Courtesy of CHRYSLER GROUP, LLC
  1. Check the cylinder head for warping with a straight edge (1) and a feeler gauge (2).
  2. The cylinder head must be flat within specification. Refer to ENGINE SPECIFICATIONS  .
  3. Remove any carbon or varnish deposits from inside of valve guides with a reliable guide cleaner.
  4. Inspect the following components and verify that they are within specification: Refer to ENGINE SPECIFICATIONS  .
    • Valve Springs
    • Valve Seats
    • Valve Guides
    • Valves
scientia non olet · About LEMON Manuals