LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.0L Fuel System) >> Fuel Injection, Gas >> Sensor, Crankshaft Position >> Removal

Sensor, Crankshaft Position: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the starter. Refer to STARTER, REMOVAL .
    GC0186986Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the wire harness connection (1) for the engine crankshaft position sensor.
  3. Remove the screw (2) and remove the crankshaft position sensor.
scientia non olet · About LEMON Manuals