LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.0L Fuel System) >> Fuel Injection, Gas >> Sensor, Air Temperature, Inlet >> Removal

Sensor, Air Temperature, Inlet: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove engine covers. Refer to COVER, ENGINE, REMOVAL .
    GC0186717Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the Inlet Air Temperature Sensor (IAT) wire harness connector (1).
  4. Remove the IAT (2).
scientia non olet · About LEMON Manuals