LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Altitude LUX >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior And Exterior (1 Of 2) >> Exterior >> Nameplate >> Removal

Body - Interior And Exterior (1 Of 2): Exterior: Nameplate: Removal

NOTE:

Exterior nameplates are attached to body panels with adhesive tape.

  1. Apply a length of masking tape on the body, parallel to the top edge of the nameplate to use as a guide, if necessary.
  2. If temperature is below 21°C (70°F) warm emblem with a heat lamp or gun. Do not exceed 52°C (120°F) when heating emblem.
  3. Insert a plastic trim stick or a hard wood wedge behind the emblem to separate the adhesive backing from the body.
  4. Clean adhesive residue from body with MOPAR® Super Kleen solvent or equivalent.
scientia non olet · About LEMON Manuals