LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Renegade Sport, FWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Occupant Restraint Controller (Orc) - DTCS B0118-95 To B012C-12 >> DTC Troubleshooting >> B0123-12 Front Driver Anchor PRETENSIONER-Circuit Short To Battery >> Set Condition

Set Condition

The Occupant Restraint Controller (ORC) monitors the resistance of the Driver Seat Belt Retractor circuits. The ORC will set this DTC if it detects voltage on the Driver Seat Belt Tensioner circuits for 2.6 seconds. The DTC will change from active to stored when the ORC monitoring shows the short to voltage circuit fault is gone for 2.6 seconds. The multifunction indicator lamp (MIL) will set in the instrument cluster.