LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Gladiator Mojave, Part Time T/Case Control, Standard Trans >> Repair and Diagnosis >> Transmission >> Clutch System >> Cylinder, Clutch Master >> Removal And Installation >> Clutch Master Cylinder >> (Torque Specifications)

(Torque Specifications)

DESCRIPTION SPECIFICATIONS COMMENT
Clutch Master Cylinder Nuts 17 N.m (13 Ft. Lbs.)  -
Clutch Pedal Bracket to Dash 20 N.m (15 Ft. Lbs.)  -
Clutch Pipe To Transmission Bolts 18 N.m (13 Ft. Lbs.)  -
Clutch Slave Cylinder 10 N.m (89 In. Lbs.)  -
Flywheel to Crankshaft Bolts 52 N.m (38 Ft. Lbs.)  Do not reuse these fasteners. If removed, a NEW  fastener must be installed and tightened to specifications.
Pressure Plate to Flywheel Bolts 30 N.m (22 Ft. Lbs.)  Do not reuse these fasteners. If removed, a NEW  fastener must be installed and tightened to specifications.