Tire Inflation Pressures
Over or Under inflated tires can affect vehicle handling. The tire can fail suddenly, resulting in loss of vehicle control.
The specified tire pressures have been chosen to provide safe operation, vehicle stability, and a smooth ride. The proper tire pressure specification can be found on the vehicle placard label provided with the vehicle (usually on the driver door opening (B-pillar) or rear edge of the driver door).
A quality air pressure gauge is recommended to check tire air pressure. Tire pressure should be checked cold once per month. Check tire pressure more frequently when the weather temperature varies widely. Tire pressure will decrease when the outdoor temperature drops. After checking the tire pressure, replace valve cap finger tight.
Inflation pressures specified on the vehicle placard label are always the cold inflation pressure of the tire. Cold inflation pressure is obtained after the vehicle has not been operated for at least 3 hours, or the vehicle is driven less than one mile after being inoperative for 3 hours. Tire inflation pressures may increase from 2-6 PSI during operation. Do not reduce this normal pressure buildup.
Improper inflation can cause:
- Uneven wear patterns
- Reduced tread life
- Reduced fuel economy
- Unsatisfactory ride
- The vehicle to drift
| 1 - Shoulder Wear |
Under inflation causes rapid shoulder wear, tire flexing, and can result in tire failure.
| 1 - Center Wear |
Over inflation causes rapid center wear and loss of the tire's ability to cushion shock.