LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Gladiator Mojave, Part Time T/Case Control, Standard Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance Reminder Light (Reset Procedures) >> Engine Oil Replacement Reminder >> Engine Oil Replacement Reminder Reset - Procedure 01 >> Manual Reset

Manual Reset

NOTE: This procedure applies to all models.
  1. Turn ignition ON, with engine OFF.
    NOTE: On vehicles with Keyless Enter-N-Go™, push the ENGINE START/STOP button and cycle the ignition to the ON/ RUN position.
  2. Fully depress the accelerator pedal, slowly, 3 times within 10 seconds.
  3. Turn ignition switch to OFF/LOCK position.
    NOTE: On vehicles with Keyless Enter-N-Go™, push the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position.
  4. If indicator message illuminates when engine is started, repeat the reset procedure.
scientia non olet · About LEMON Manuals