Fuel Pump Module
WARNING: This page is about a different variant/trim than selected.
The fuel pump module assembly is located on the top of the fuel tank. The fuel tank module assembly contains the following components:
- An electric fuel transfer (lift) pump
- A fuel reservoir
- A separate in-tank fuel filter
- A fuel gauge sending unit (fuel level sensor)
- A lock ring to retain pump module to tank
- A soft gasket between tank flange and module
- Fuel line return connection
The electric fuel pump is located inside of the fuel pump module. A 12 volt, permanent magnet, electric motor powers the fuel pump. The electric fuel pump is not a separate, serviceable component.
The fuel gauge sending unit (fuel level sensor) is attached to the fuel pump module. The sending unit consists of a float, an arm, and a variable resistor track (card). The sensor is non-serviceable. If replacement is necessary, the fuel pump module assembly must be replaced.