Pressure Cap
WARNING: This page is about a different variant/trim than selected.
PRESSURE CAP
| Refer to COMPONENT INDEX . |
All radiators are equipped with a pressure cap. This cap releases pressure at a point within the range of 124-145 kPa (18-21 psi). The pressure relief point (in pounds) is engraved on top of the cap. The cooling system will operate at pressures slightly above atmospheric pressure. This results in a higher coolant boiling point allowing increased radiator cooling capacity. The cap contains a spring-loaded pressure relief valve. This valve opens when system pressure reaches the release range of 124-145 kPa (18-21 psi). A rubber gasket seals the radiator filler neck. This is done to maintain vacuum during coolant cool-down and to prevent leakage when system is under pressure.