Powertrain Control Module
WARNING: This page is about a different variant/trim than selected.
POWERTRAIN CONTROL MODULE
| Refer to COMPONENT INDEX . |
Inputs
- Indicates whether the ECC/HVAC is requesting A/C compressor activation or not.
- Pressure Sensor.
- Engine Oil Temperature.
- Engine Coolant Temperature.
- DPF Regeneration.
- Engine RPM.
- Engine Run Status.
- Intake Air Temp.
- Engine Thermal Management Demand.
- Vehicle speed.
- Commanded ignition switch status.
- Hood ajar status.
- Ambient Temp Sensor A/D Voltage.
- Maximum A/C demand to powertrain.
- Transmission fluid temperature.
Outputs
- Cooling fan request.
- Radiator Fan request.
- Fan PWM duty cycle command [%].