LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Gladiator Mojave, Part Time T/Case Control, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (3.0L Engine (Service Information) (2 Of 3)) >> Cylinder Head >> Standard Procedure >> Valve Service >> Valve Seat Refacing

Valve Seat Refacing

WARNING: This page is about a different variant/trim than selected.
  1. Install a pilot of the correct size in the valve guide bore. Reface the valve seat to the specified angle with a good dressing stone. Remove only enough metal to provide a smooth finish.
  2. Use tapered stones to obtain the specified seat width when required.