Default Action

WARNING: This page is about a different variant/trim than selected.

Malfunction Indicator Lamp (MIL) is illuminated on the first trip that the diagnostic fails.
The Transmission will be placed into Third Gear Limp-in mode.
The TCM will not request any positive torque interventions from the Powertrain Control Module (PCM) via CAN.
The Torque Converter Clutch (TCC) will be commanded open.
Clutch adaptation functions will be disabled.
Maximum system hydraulic pressure will be limited.
Special shifting modes (Manual Mode, Sport Mode, Tow Mode) will be disabled.
Engine Stop/Start (ESS) function, if equipped, will be disabled.