Engine Specifications Diesel: General Description
WARNING: This page is about a different variant/trim than selected.
GENERAL DESCRIPTION
| DESCRIPTION | SPECIFICATION |
|---|---|
| Displacement 3.0L | 3.0L (2987 cc) (182.28 CID) |
| Bore | 83 mm (3.27 in.) |
| Stroke | 92 mm (3.62) |
| Compression Ratio | 16:1 |
| Valves Per Cylinder | 4 |
| Weight | 234 Kg (516 lbs.) |
| Power Output | 194 Kw (260 HP) @ 3600 RPM |
| Torque | 650 N.m (479 ft. lbs.) @ 1800-2200 RPM |
| Idle Speed - Warm | 650 RPM |
| Max RPM in Gear | 4600 |
| Max RPM in Neutral | 4000 |
| Ribbed V-Belt Tension | Automatic Belt Tensioner Roller |
| Thermostat Opening | 98° C (208° F) |
| Cooling System Capacity | 11 L (11.6 Qts.) |
| Engine Oil Capacity | 8.8 L (9.3 Qts.) W/Filter Change |
| Timing System | Chain Driven Dual Overhead Camshafts |
| Air Intake | Dry Filter With Turbocharger and Charge Air Cooler |
| Fuel Supply | Electric Pump In The Fuel Tank |
| Fuel System | Direct Fuel Injection Common Rail System |
| Combustion Cycle | 4 Stroke Diesel |
| Cylinder Compression Difference Between Cylinders | 5 Bar (73 psi.) |
| Cooling System | Water Cooling |
| Engine Pre Heat | Glow Plug |
| Glow Plug Type | Ceramic NGK CZ506 |
| Glow Plug Voltage | 7 Volts |
| Emission Standards | (NAFTA) : LEVIII / Tier3 LEV160/BIN160 (CARB/EPA) |
| Injection Pressure | 2000 Bar (29, 008 psi) |
| Injection Pump | Bosch CP4.20/2, 2000 Bar (29, 008 psi) |
| Injection Order | 1-4-2-5-3-6 |
| Injector Type | CRI 2-20 |
| Lubrication | Pressure Lubricated By Rotary Pump |
| Oil Quantity with Filter | 7.8L L (8.2 Qts) |
| Oil Pressure 105° C (221° F) | 1.1 Bar (15.9 psi.) at Idle 4.5 Bar (58 psi) at 3600 RPM |
| Engine Rotation | Clockwise Viewed From Front Cover |