Cylinder Head
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD
| DESCRIPTION | SPECIFICATION | |
|---|---|---|
| Metric | Standard | |
| Cylinder Head Height | 133 ± 0.06 mm | 5.2362 ± 0.0023 in. |
| Cylinder Head Flatness Deformation Tolerance | 0.1 mm | 0.0039 in. |
| Valve Seat Width in Cylinder Head | ||
| Intake valve | 28.060 / -0.3 mm | 1.1047 / -0.0118 in. |
| Exhaust valve | 24.680 / -0.3 mm | 0.9716 / -0.0118 in. |
| Valve Face Angle in Head | 2°15'/2° | 2°15'/2° |
| Internal Diameter of Valve Guide for Intake / Exhaust Valve | 5+0.033 / +0.015 mm | 0.1968+0.001 / +0.0005 in. |
| Valve Guide Installation Height | 75.565 ± 0.3 mm (intake) 75.58 ± 0.3 mm (exhaust) |
2.9750 ± 0.0118 in. (intake) 2.9756 ± 0.0118 in. (exhaust) |
| Cylinder Head Bolts | ||
| Thread Diameter | 14 x 1.5 mm | NA |
HEAD GASKET CHART
| DESCRIPTION | SPECIFICATION | |
|---|---|---|
| Metric | Standard | |
| Piston Clearance | 0.130 - 0.220 mm | 0.0051 - 0.0086 in. |
| Cylinder Head Gasket Thickness | 1.00 mm | 0.0377 in. |
| Gasket Identification | NO HOLE | |
| Piston Clearance | 0.221 - 0.310 mm | 0.0087 - 0.0122 in. |
| Cylinder Head Gasket Thickness | 1.10 mm | 0.0417 in. |
| Gasket Identification | ONE HOLE | |
| Piston Clearance | 0.311 - 0.402 mm | 0.0122 - 0.0158 in. |
| Cylinder Head Gasket Thickness | 1.20 mm | 0.0456 in. |
| Gasket Identification | TWO HOLES | |