LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Gladiator Mojave, Part Time T/Case Control, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> 3.6L Engine (Service Information) (2 Of 3) >> Engine Block >> Crankshaft >> Standard Procedure >> Crankshaft End Play

Crankshaft End Play

GC0081626Courtesy of CHRYSLER GROUP, LLC
  1. Mount Dial Indicator Set (special tool #C-3339A, Set, Dial Indicator) to a stationary point at the front of the engine. Locate the probe perpendicular against the nose of the crankshaft.
  2. Move the crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move the crankshaft forward to the limit of travel and read the dial indicator. Compare the measured end play to the specification. Refer to CRANKSHAFT END PLAY  .
NOTE:

Crankshaft thrust washers are not selectable and are only available in a single thickness.

scientia non olet · About LEMON Manuals