| Axle Retainer Nuts |
80 N.m (59 Ft. Lbs.) |
- |
| Bearing Cap Bolts |
95 N.m (70 Ft. Lbs.) |
- |
| Differential Cover Bolts |
41 N.m (30 Ft. Lbs.) |
Do not reuse these fasteners. If removed, a NEW
fastener must be installed and tightened to specifications. |
| Drain Plug |
34 N.m (25 Ft. Lbs.) |
- |
| Fill Plug |
34 N.m (25 Ft. Lbs.) |
- |
| Pinion Nut |
488 N.m (360 Ft. Lbs.) |
Do not reuse these fasteners. If removed, a NEW
fastener must be installed and tightened to specifications. |
| Ring Gear Bolts |
Torque Procedure:
- Tighten to 100 N.m (74 Ft. Lbs.)
- Rotate additional 57.5°
|
Do not reuse these fasteners. If removed, a NEW
fastener must be installed and tightened to specifications. |
| Rear Axle Vent Fitting |
22 N.m (17 Ft. Lbs.) |
- |