Set Condition
- Door Unlock Output ON
- Driver Door:
When the Body Control Module (BCM) detects greater than 20.0 amps on the Door Unlock Control circuit.
- Passenger Doors:
When the BCM detects greater than 40.0 amps on the Door Unlock Control circuit.
- Secondary Doors:
When the BCM detects greater than 18.0 amps on the Door Unlock Control circuit.
- Door Unlock Output OFF
- When the BCM detects less than 1.253 volts on the Door Unlock Control circuit.
- The BCM will deactivate the output for the remainder of the ignition cycle after four consecutive BCM output retry attempts have failed within that ignition cycle.