LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Compass Altitude, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Pod, Switch Bank >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the switch bank pod to the instrument panel center bezel.
  2. Install the fasteners to the back of the switch bank pod and tighten them securely.
  3. Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals