Lamp, Backup: Removal
NOTE:
The backup lamp is a component of the outer tail lamp. This procedure is for the removal of the backup lamp bulb.
- Remove the outer rear lamp unit from the end of the quarter panel. Refer to LAMP, TAIL, REMOVAL .
- Firmly grasp the backup lamp bulb socket (3) and rotate it counterclockwise to unlock it from the keyed opening (1) in the rear lamp unit housing.
- Pull outward on the bulb socket and remove it from the rear lamp unit housing.
- Pull outward at the base of the backup lamp bulb (2) and remove the bulb from the socket.