Generator Light Does Not Work

Turning the ignition key to run, the generator warning light does not come on.

1	CHECK WITH DIAGNOSTIC TOOL	Result OK	Result Not OK	Action
	Connect a diagnostic scan tool. Test the functionality of the light in the instrument panel cluster through active diagnosis.	Continue to Step 2	The light doesn't work.	Replace instrument panel cluster
2	CHECK ELECTRICAL SYSTEM	Result OK	Result Not OK	Action
	Verify the Body Control Module (BCM) power supplies are correct and in particular the signal "D +".	Continue to Step 3	1. Power to the BCM incorrect 2. Signal D + between generator and BCM interrupted or faulty wiring 3. Faulty generator	1. Restore correct power to the BCM 2. Restore proper wiring 3. Replace generator
3	CHECK PROPER OPERATION	Result OK	Result Not OK	Action
	Verify that the fault is no longer present	Diagnostic complete