Gap And Flush: Specifications
BODY GAP AND FLUSH SPECIFICATIONS FOR THE ADJUSTMENT OF MOVING PARTS
To facilitate and verify moving parts disassembly operations, the existing gaps are shown (in millimeters) to allow appropriate adjustment.
The adjustment procedure is explained in the sections describing moving part removal and installation procedures.
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|
 Courtesy of CHRYSLER GROUP, LLC
|